EACE Journal — Vol. 16, No. 1
Experimental Investigation of Sawdust as a Sustainable Partial Replacement Material in Concrete Composites
Besrat Berhanu, Zenagebriel Gebremedhn
Abstract
This study experimentally investigated sawdust as a sustainable partial replacement material in C 25 concrete, addressing global concerns over natural sand depletion and environmental degradation. Treated sawdust, derived from lignocellulosic biomass rich in cellulose, hemicellulose, and lignin, plays a dual role in concrete composites: its porous structure lowers density, while its fibrous morphology can enhance internal bonding. However, untreated lignocellulose absorbs significant water, potentially weakening the cement matrix; therefore, the sawdust in this study was pre-treated with waste engine oil and lime water, reducing absorption from 34.98% to 10.79% in line with ASTM C330. Concrete mixes incorporating 0%, 5%, and 10% sawdust were evaluated for mechanical, physical, and economic performance. At the optimal 10% replacement, 28-day compressive strength reached 30.25 MPa, only 3.51% below the 31.35 MPa control, while splitting tensile strength decreased marginally by 2.53% (3.08 MPa vs. 3.16 MPa). Workability remained acceptable, with slump values of 37 mm compared to 45 mm for the control. Density dropped from 2512.99 kg/m³ to 2360.27 kg/m³, achieving a 6.08% reduction, beneficial for lightweight applications. Water absorption decreased by 31.8%, indicating improved durability, and production costs were reduced by up to 341.62 ETB/m³ (about 6.4% savings) when substituting 10% of sand with sawdust. Nonetheless, higher replacement levels (15–25%) caused strength losses exceeding 30%, confirming their unsuitability for structural use. Key limitations include the short-term scope of mechanical testing, exclusion of long-term durability assessments such as shrinkage, carbonation, and sulfate attack, and insufficient microstructural analysis to fully explain hydration–lignocellulose interactions. Additionally, the study focused on a single wood-waste source and treatment method, limiting generalizability. Despite these boundaries, the findings highlight the potential of treated sawdust to support circular-economy construction practices, reduce reliance on river sand, and promote environmentally responsible material innovation. Keywords: Cost Efficiency, Compressive Strength, Circular Economy, Sawdust, Sustainable Concrete.
Read Full Article (PDF)