Telegram Facebook

EACE Journal — Vol. 14, No. 1

Strengthening of Reinforced Concrete Beams using Steel Sheets

Abrham G. Tarekegn, Menberu Elias, Elmer C. Agon, Yisihak Gebre

Abstract

Nowadays, deterioration of structural members by aging, overloading, environmental actions and so on is critical issues which faces safety of structures which faces many countries. It is important to restore performance of deteriorated structures to the desired level. For such purposes, strengthening of members using plate jacketing is common. In this study, experimental works and numerical modelling were used to investigate the flexural and shear behaviour of reinforced concrete beams strengthened with steel sheet. Reinforced concrete beams strengthened by attaching steel sheets with various configuration and layers of steel plates were tested until failure using two points loading. In the experimental works, one set of beam specimens with lower flexural strength were strengthened by attaching various number of steel sheets to the soffit, whereas shear-prone beam specimens were strengthened by using u-shaped plates and web plating on both faces. To evaluate the effect of additional parameters on strengthening that were not addressed by the experimental works, simulation software was used. According to the findings of the experimental and numerical simulations, strengthening using steel plates increases beam flexural and shear capacities by 16.2% and 22.68%, respectively. Moreover, it was observed that deflection of beams were reduced by 8.89% to 19.69% as compared to the control specimens, with U-wrapping of steel proving to be particularly effective. Key Words: Deterioration, Strengthening, Plate jacketing, Flexure, Shear.

Read Full Article (PDF)