EACE Journal — Vol. 13, No. 2
EFFECT OF MOLDING WATER CONTENT ON SWELLING AND STRENGTH CHARACTERISTICS OF LIME STABILIZED EXPANSIVE SOIL
Brook Demissu and Samuel Tadesse
Abstract
Abstract Expansive soils are problematic soils that undergo huge volume change when exposed to moisture fluctuation. Thus, in alternate rainy and summer seasons, expansive soil strata undergo swelling and shrinkage. Lightly loaded civil engineering structures founded in these soils are, therefore, subjected to severe distress. Lime stabilization is one of the most effective techniques used to treat this type of soil. Due to cationic exchanges, lime can significantly reduce swell potential. However, stabilization of such type of soil with lime depends on the amount of water added during stabilization (also known as molding water content). Hence, the molding water affects the swelling tendency of the soil and stabilizing activity of the lime. This research investigated the effect of molding water contents on swelling pressure and strength of an expansive soil stabilized with optimum amount of lime. For that purpose, a series of laboratory tests were performed in two phases. From the first phase of the experimental program the optimum amount of lime for stabilization of the soil underinvestigation was found to be 6%. In the second phase of the program, swell consolidation and unconfined compressive strength tests were conducted on specimens treated with optimum amount of lime prepared at maximum dry density (MDD) but having different molding water contents, optimum moisture content (OMC) and dry and wet sides of OMC. The results of this research have shown that molding water content does not affect the swelling pressure. However, unconfined compressive strength improves significantly on soil-lime specimens prepared on the wet side of optimum moisture content. Keywords: Expansive clay soil, Lime, Soil Stabilization, Molding water content, Swelling pressure, Unconfined Compressive strength.
Read Full Article (PDF)