EACE Journal — Vol. 13, No. 2
Parametric Study of Reinforced Concrete Deep Beams with Rectangular Web Openings Subjected to a Static Monotonic Loading
Pinel Getu
Abstract
Abstract: Transverse openings in beams are commonly used to accommodate utility lines like pipes, cables and ducts. Past studies have shown that these openings can reduce the flexural and shear strength of beams, particularly in reinforced concrete (RC) deep beams. Deep beams, which are often used as transfer girders to support columns, carry heavy concentrated loads. This study focuses on investigating the impact of parameters such as the degree of interruption of the load path, opening size, aspect ratio of opening sides, and compressive strength of concrete in RC deep beams with rectangular web openings. The investigation is conducted through numerical simulations using non-linear finite element analysis (FEA). A total of 73 numerical simulations were conducted to investigate various parameters in RC deep beams with rectangular web openings. The study focused on failure load, maximum deflection, cracking load, and maximum crack width as the main output parameters. Results indicated that when openings were placed within the shear span of the beam, increased interruption in the load path and larger opening sizes led to a significant reduction in failure load (shear strength) of the beams, with strength reductions of more than 50% was observed. However, when openings were placed within the flexural region, failure load was similar to solid beams without openings, but there was a substantial increase in deflection (up to 39%). Additionally, cracking load decreased with larger opening sizes within the shear span. Furthermore, It was observed that increasing the compressive strength of the concrete was effective in compensating for strength loss only when the openings were small (opening area < 8.59% of the shear span area). For larger openings, increasing the concrete grade had an insignificant effect on failure load (shear strength). Key Words: Deep Beam, Finite Element Analysis, Reinforced Concrete
Read Full Article (PDF)